iLuthier

Instead of taping off frets with masking tape during fret dressing – a practice which is quite time consuming – use a thin metal strip cut from a soda can using an X-acto or utility knife and then put some fret sized slots in it. It’s a lot more durable than tape and an empty soda can is usually always readily available.

To use your “soda shim”, one hand holds the shim over the fret while you dress it with your file held in the other hand. Your index finger on your shim hand can act as a guide for the file as you dress.

Also, if you can find one around at your local art or craft suppliers you can use a draftsmans “eraser shield”, or some other thin shim style stock, but a soda can is usually pretty easy to find.

Fender Pre-Cut 7.25" Radius Vintage Fret Wire 24 Pcs US $14.42 Auction Ends: Monday Feb-06-2012 20:25:10 PST   | Watch this Item

Vintage NOS Gibson Fret Wire - Guitar Parts US $35.00 Auction Ends: Monday Feb-06-2012 21:27:35 PST   | Watch this Item

Vintage NOS Gibson Mandolin Fret Wire - Guitar Parts US $35.00 Auction Ends: Monday Feb-06-2012 21:27:38 PST   | Watch this Item

Fender Pre-Cut 9.5" Radius Standard Fret Wire 24 pieces US $12.63 Auction Ends: Monday Feb-06-2012 22:04:04 PST   | Watch this Item

Fender Fretwire Guitar Jumbo 12" Radius 24 Pieces US $18.38 Auction Ends: Monday Feb-06-2012 22:19:02 PST   | Watch this Item

21pcs Bass Guitar Fret Wire Fretwire Set 2.7mm High Quality US $2.99 (0 Bid) Auction Ends: Monday Feb-06-2012 22:19:13 PST   | Watch this Item

21pcs Bass Guitar Fret Wire Fretwire Set 2.9mm Free Ship New US $2.99 (0 Bid) Auction Ends: Monday Feb-06-2012 22:19:13 PST   | Watch this Item

24pcs Electric Guitar Fret Wire Fretwire Set 2.2mm Free Ship New US $2.49 (0 Bid) Auction Ends: Monday Feb-06-2012 23:59:04 PST   | Watch this Item

Not so much “the rage” any more but if you ever need to scallop a fretboard here are some tips:

1:- Use a small convex violinmaker’s plane to rough out the work. Try to find one – or make one yourself – which is about 3/8″ wide (9mm) as this will be the most versatile size and get you right up to the 15th or 16th fret. You’ll find it’s quicker and a lot safer than using a small gouge as well.

2:- When you can no longer use the plane switch to a rat-tail file to finish the rest, as well as clean up the plane marks. Once you’ve don that then use a small scraper or sandpaper to finish the job. Sandpaper glued to wooden dowels can give you a nice selection of clean up “files”.

3:- If you’re going to refret then don’t take the frets out until after you’ve finished the scalloping, otherwise the wood around the fret will be unsupported and more prone to chipping out.

4:- If the fingerboard is inlayed then remove the inlays first so that you don’t plane or file through them. Pearl and abalone are also very hard on your plane blades. If the fingerboard is laden with inlay then think twice about taking the job on. It might be more work than it’s worth.

5:- Think about making the scallop deeper just behind the fret as this is where it’s mostly needed, after all. You can go deeper but 3/32″ deep is sufficient for most jobs.

Ebony, Black (Gaboon/Gabon) 12 13/16 x 2 x 7/8+ exotic lumber/wood #896 US $22.50 Auction Ends: Tuesday Feb-07-2012 8:45:48 PST   | Watch this Item

Ebony, Black (Gaboon/Gabon) 13 1/16 x 2 x 7/8+ exotic lumber/wood #897 US $22.50 Auction Ends: Tuesday Feb-07-2012 8:48:13 PST   | Watch this Item

Ebony, Black (Gaboon/Gabon)12 3 /16 x 1 7/8 x 1+ exotic lumber/wood African #900 US $17.00 Auction Ends: Tuesday Feb-07-2012 9:01:07 PST   | Watch this Item

Ebony, Black (Gaboon/Gabon) 13 1/16 x 1 15/16 x 11/16 exotic lumber/wood #902 US $17.50 Auction Ends: Tuesday Feb-07-2012 9:05:39 PST   | Watch this Item

Ebony, Black (Gaboon/Gabon) 13 1/16 x 1 15/16 x 9/16 exotic lumber/wood #903 US $16.50 Auction Ends: Tuesday Feb-07-2012 9:07:49 PST   | Watch this Item

Ebony, Black (Gaboon/Gabon) 13 1/8 x 2 1/16 x 9/16 exotic lumber/wood #904 US $17.00 Auction Ends: Tuesday Feb-07-2012 9:10:02 PST   | Watch this Item

Ebony, Black (Gaboon/Gabon) 13 1/16 x 1 31/32 x 9/16 exotic lumber/wood #905 US $16.50 Auction Ends: Tuesday Feb-07-2012 9:12:33 PST   | Watch this Item

GABON EBONY 20-3/4" x 2" x 1" ~ EXOTIC WOOD LUMBER 1345 US $34.99 Auction Ends: Tuesday Feb-07-2012 11:08:08 PST   | Watch this Item